Troubleshooting - cecotec IRONMIX Manuel D'instructions

ENGLISH
4. Turn the lock on the main body to locked position and put the measuring cup on its place.
5. Plug the appliance and turn on the power switch.
6. Set the timer and select the speed (1-5).
7. After use, turn the appliance off and remove the jar.
8. Take the food out of the jar.
Caution:
1. Do not use the butterfly to knead dough!
2. Start the appliance one the accessories have been properly installed!
3. Do not add hard ingredients that might damage or block the butterfly when the blade is in
motion and the butterfly is assembled!

5. TROUBLESHOOTING

Code
E01 When the appliance heats up, the detector
might not turn on due to overheating.
E02 The lock on the main body does not lock.
E03 1. The jar cannot be not installed on the unit.
2. The lid cannot be installed
3. The lid is not properly installed
E04 1. Too many ingredients or the speed is too
slow.
2. The motor heats up.
E05 Machine failure.
22 IRONMIX
Explanation Solution
Please contact technical support
service
Turn off the machine, make sure the
jar and the lid ara properly placed,
and turn on the appliance.
Turn off the machine and install the
jar or close the lid. Take off the lid
and reinstall it correctly according to
the manual. Reset the machine.
1. Reduce the amount of ingredients
or set a higher speed.
2. Stop working for few minutes.
Contact technical support service.