Installation Preparation - GE Zoneline AZ95E Mode D'emploi

Installation Preparation

TYPE OF ELECTRIC CONNECTIONS
A power supply kit must be used to supply power to
Models must be installed using the appropriate GE
Appliances power supply kit for the branch circuit
amperage and the electrical resistance heater
connection of components is done in accordance with
electrical codes.
External Disconnect
electrical supply located within line of sight of the
disconnecting means shall be readily accessible
disconnect shall not obscure the rating plate or be
located on the access panel or closet door. A properly
rated field supplied switch is a common means for
electrical disconnection.
POWER CONNECTION CHART
Power Supply Kits
230 / 208 Volts
Power Supply Kits
265 Volts*
49-5000561 Rev. 1
Direct Connections
Configuration
Direct Connection
Hard Wired
Hard Wired
Hard Wired
Configuration
Direct Connection
Hard Wired
Hard Wired
Hard Wired
Power Supply Kit Direct Connect
208/230/265 Volt Applications
MPORTANT: Connection to a branch circuit MUST
be done by direct connection in accordance with the
by code.
Heater Wattage
@ 230 / 208 Volts
Heater Wattage
@ 265 Volts
Circuit Protective Device 9k/12k/18k
Circuit Protective Device 9k/12k/18k