Care And Cleaning; Air Filters; Drain - GE Zoneline AZ95E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and Cleaning

Turn off the Zoneline and disconnect the power supply before cleaning.

Air Filters

NOTICE: Do not operate the Zoneline without the
filter in place. If a filter becomes torn or damaged, it
should be replaced immediately.
Operating without the filter in place or with a damaged
filter will allow dirt and dust to reach the indoor coil and
reduce the cooling/heating, performance, airflow, and
efficiency of the unit.
Dirty filters reduce cooling, heating performance and air
flow.
Changing the filter will: Decrease cost of operation,
reduce the risk of premature component failure.
Replacement filters should be purchased from your local
retailer where air conditioner and furnace accessories
are sold.
NOTE: Use only one filter in the installation.
To replace the filter (unit mounted return air filter):
2. Remove the filter.
To maintain optimum performance, change the filter
at least every 30 days.

Drain

Clean the drain system regularly to prevent clogging.
8
To remove
and replace
the filter:
Filter
Return air grille
Remove Filter
Unit-mounted filter
Filter
Access-panel with
return air grille
49-5000561 Rev. 1

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Zoneline az95h

Table des Matières