Optional Accessories; Protecting The Environment - DeWalt DWS727 Traduction De La Notice D'instructions Originale

Optional Accessories


WARNING: Since accessories, other than those offered by D
have not been tested with this product, use of such accessories with
this tool could be hazardous. To reduce the risk of injury, only D
recommended accessories should be used with this product.
Consult your dealer for further information on the appropriate accessories.
Clamp: DW7090-XJ (Fig. B)
37
The clamp is used for firmly clamping workpiece to the saw table.
Quick Release Clamps: DWS5026-XJ
Dust Bag: DW7053-QZ (Fig. C)
Equipped with a zipper for easy emptying, the dust bag
majority of the sawdust produced.
Leg Stands: DE7023-XJ, DE7033-XJ (Fig. D)
39
The leg stand is used to extend the table width of the saw.
Clamp Brackets: DE7025-XJ (Fig. E)
40
The clamp brackets are used for mounting the saw to a stand.
sAW BLADEs: ALWAYS USE 250 mm SAW BLADES WITH 30 mm ARBOUR
HOLES. SPEED RATING MUST BE AT LEAST 4000 RPM. Never use a smaller
diameter blade. It will not be guarded properly. Use crosscut blades only!
Do not use blades designed for ripping, combination blades or blades with
hook angles in excess of 5°.
BLADE DEsCRIPTIOns
APPLICATION
Construction Saw Blades (thin kerf with anti-stick rim)
General Purpose
Fine Crosscuts
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts
Non-ferrous metals

Protecting the Environment

Separate collection. Products marked with this symbol must not
be disposed of with normal household waste.
Products contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical
products according to local provisions. Further information is available at
www.2helpU.com.
WALT,
e
WALT
e
38
will capture the
DIAMETER TEETH
250 mm 40
250 mm 60
250 mm 80
250 mm 96
EnGLIsh
45