English
NAIL SELECTION
Be sure to use only the genuine HITACHI nails for the NR65AK2 / NR65AK2 (S). The use of any other nails
can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Paper-collated strip nails
Full-head nails
(8d) .131 × 1-1/2" (3.3 × 38 mm)
(10d) .148 × 1-1/2" (3.8 × 38 mm)
(10d) .148 × 2-1/2" (3.8 × 64 mm)
(16d) .162 × 2-1/2" (4.1 × 64 mm)
ACCESSORIES
WARNING
Accessories other than those shown below
can lead to malfunction and resulting
injuries.
STANDARD ACCESSORIES
1 Eye protection ........................................................1
OPTIONAL ACCESSORIES... sold separately
Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.
10
000Book̲NR65AK2̲NA̲lowes.indb 10
000Book̲NR65AK2̲NA̲lowes.indb 10
WARNING
Min.
.280"
(7.1 mm)
.131"
(3.3 mm)
APPLICATIONS
BEFORE OPERATION
1
Read section titled "SAFETY" (pages 4 – 8).
Make sure of the followings before operation.
WORKING ENVIRONMENT
(Code No. 877153)
(Code No. 874042)
(Code No. 876212)
(7.1 mm)
(4.1 mm)
DANGER
Pre-punched holed metal connector to wood
stud installation only.
Never drive nails into metal or concrete.
Metal hardware with pre-punched holes to wood stud
installation only.
Straps, Joist hangers, framing anchors
WARNING
No fl ammable gas, liquid or other fl ammable
objects at worksite.
Clear the area of children or unauthorized
personnel.
Max.
.280"
.162"
2018/03/09 15:49:14
2018/03/09 15:49:14