Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NAIL SELECTION
Use of genuine HITACHI hardened nails will minimize the possibility that a nail could ricochet and seriously
injure someone, but dose not avoid that risk entirely. The use of any other nails and non-hardened nails could
result in dangerous tool malfunction and/or nail malfunction, causing serious injury.
Select adequate nail size to meet proper metal hardware requirement needed for application, designed by metal
hardware manufacturer and regulated by the applicable building code.
Only nails shown in the Table below can be driven with this Nailer.
Paper-collated strip nails
Full-head nails
(8d) .131×1-1/2" (3.3×38 mm)
(10d) .148×1-1/2" (3.8×38 mm)
(10d) .148×2-1/2" (3.8×64 mm)
(16d) .162×2-1/2" (4.1×64 mm)
ACCESSORIES
Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any obligation on the part of HITACHI.
1
... sold separately
(Code No.877153)
(Code No.874042)
(Code No.876212)
WARNING
Min.
.280"
(7.1 mm)
.131"
(3.3 mm)
DANGER
1 Eye protector
— 9 —
English
Max.
.280"
(7.1 mm)
.162"
(4.1 mm)
1
Publicité
Table des Matières
