Scheduled Maintenance; Grinder Wear And Tear Check - Astoria Plus4You TS Manuel D'utilisation Et D'entretien

Scheduled maintenance

8.4
If enabled, this function displays a message to alert
the user when it is necessary to perform the scheduled
maintenance.
After reaching the programmed threshold value, the
display shows the following message:
This message continues to be displayed until the
maintenance is performed.
If enabled, the display may show various scheduled
maintenance thresholds.
The warnings for reached/exceeded thresholds do
not prevent the machine from functioning.
The messages on the display can be reset at any
time (also before the warning is triggered) and can be
performed by the technician.
When the machine is functioning, the system in-
creases both the machine cycle counter and the time
that has passed since installation counter.
In order to programme this, contact a Qualified Technician.

Grinder wear and tear check

8.5
If enabled, this function displays a message to alert
the user when it is necessary to replace the grinder-dis-
penser grinders.
USER manual
The warning appears when the amount coffee (kg)
used reaches the programmed limit.
The message will remain on the display in the se-
lection standby phase or in the programming standby
phase.
The warning for reached/exceeded thresholds does
not prevent the machine from functioning.
The count can be reset at any time (also before the
alarm is triggered) and can be performed by the tech-
nician.
The system only operates if the machine is paired with a single
grinder. In order to programme this, contact a Qualified Technician.
69 260
of