Ryobi R18RT Traduction Des Instructions Originales page 8

ACCESSORY
Figure
Drum sander mandrel (Ø 6.4 mm)
(Ø 3.2 mm shank/collet)
Drum sander mandrel (Ø 12.7 mm)
(Ø 3.2 mm shank/collet)
Wrench
15.9 mm. x 9.5 mm orange 120-grit aluminum oxide
grinding wheel bits
9.5 mm x 12.7 mm orange 120-grit aluminum oxide
grinding wheel bits
32 mm fi berglass cut-off wheel
used with [A18] mandrel
6.4 mm screw mandrel
6.4 mm x 12.7 mm sanding drums,
used with [A1] mandrel
12.7 mm x 12.7 mm sanding drums,
used with [A2] mandrel
Felt polishing wheels
used with [A7] mandrel
Polishing compound vial
3.2 mm high speed steel drill bit
Wire brush wheel
Cut-off wheel mandrel,
3.2 mm shank
0.8 mm engraving bit
High-speed cutter
Conical grinding stone
6 | English
Accessory Accessory number Application
A1
Attaching to sanding
drums
A2
Removing and
A3 inserting accessory
bits
A4
Grinding metal
A5
Cutting bolts, screws,
A6
nails, and thin wood
Attaching to polishing
A7
wheels
A8 (60 grit)
A9 (12 grit)
A12 (240 grit)
Sanding wood
A10 (60 grit)
A11 (12 grit)
A13 (240 grit)
Polishing and buffi ng
A14 metals, stone, glass
and ceramics
Polishing and
A15 brightening metals
and plastics.
A16 Drilling
A17 Brushing metal
Attaching to fi berglass
A18
cut-off wheels
A19 Engraving soft metals
Shaping curved
surfaces and
A20
engraving soft metals
and wood
A21 Grinding metal