Medtronic DBS Patient programmer Manuel D'utilisation page 98

Screen
Informational
POR (small "i"
icon in the upper
left corner)
98
English 37642 2015-04
Table 4.1 POR screens (continued)
Description and action
The neurostimulator has been
reset. Your therapy has stopped.
1. Press any arrow on the
Navigator key to clear the
screen
2. Reset the time, if prompted
(for instructions, see
Table 2.6). Before resetting
the time, confirm the patient
programmer or antenna is
directly over the
neurostimulator.
3. Press the up arrow on the
patient programmer. This
action will clear the POR.
4. Press the Therapy on/off
key to turn your therapy on.
Call your clinician to report the
reset.