Medtronic DBS Patient programmer Manuel D'utilisation page 77

Figure
4. Press the up
Navigator key to move the selection box
the desired group (Figure 3.6).
Figure
5. Resynchronize the patient programmer
and neurostimulator.
a. Hold the patient programmer (or
antenna) directly over your
neurostimulator with the screen facing
outward.
b. Press the Check
with the patient programmer and
activate the selected group.
3.5 Group screen.
or down
3.6 Select the desired group.
37642 2015-04 English
arrow on the
key to sychronize
77