Table
Row
c
If only one group is available, this row displays only
the parameter setting icon.
Synchronizing the patient
programmer and your
neurostimulator
In order to check your neurostimulator status,
change therapy settings, or turn your
neurostimulator on and off, you must first
synchronize the patient programmer and the
neurostimulator.
Complete the following steps to synchronize
the patient programmer and neurostimulator.
1. Locate the Check
2. Hold the patient programmer (or antenna)
directly over the neurostimulator with the
screen facing outward.
3. Press the Check
2.3 Therapy screen icons
Icons Description
37642 2015-04 English
key.
key.
43