Note: See Chapter 6 "Troubleshooting" for
more information about synchronizing the
patient programmer and neurostimulator.
Turning your therapy on or off
Complete the following steps to turn your
therapy on. Be sure to talk to your doctor
about turning your therapy on or off before
following this procedure.
1. Synchronize the patient programmer and
neurostimulator.
a. Hold the patient programmer (or
b. Press the Check
The Status icon on the Therapy screen
indicates whether your therapy is turned
on or off (Figure 2.12).
46
English 37642 2015-04
antenna) directly over your
neurostimulator with the screen facing
outward.
screen appears.
key. The Therapy