–
Press and hold down the Selection
key to increase or decrease the setting
which will change approximately every
half-second.
5. Press any arrow on the Navigator key to
return to the Therapy screen.
6. Repeat steps 2-5 for the other side of your
body if desired.
Note: If you have multiple
neurostimulators, the patient programmer
must be turned off prior to synchronizing
with the other neurostimulator.
Selecting a new group
The group feature is only available in
Advanced mode.
Caution: Select the group that your
clinician has recommended for your
specific needs.
1. Synchronize the patient programmer and
neurostimulator.
37642 2015-04 English
75