Checking The Nonrechargeable Battery Status - Medtronic DBS Patient programmer Manuel D'utilisation

Checking the nonrechargeable
battery status
1. Synchronize the patient programmer and
neurostimulator.
Note: For information on checking and
charging the rechargeable
neurostimulator battery, see
Chapter 5 "Important information about
your rechargeable neurostimulator".
a. Hold the patient programmer (or
antenna) directly over your
neurostimulator with the screen facing
outward.
b. Press the Check
screen appears (Figure 2.14).
Therapy is turned On
Figure 2.14 Therapy status is displayed.
37642 2015-04 English
key. The Therapy
Therapy is turned Off
49