Using The Clinician Programmer To Activate A New Group - Medtronic DBS Patient programmer Manuel D'utilisation

your patient programmer or you can return to
the clinician managing your neurostimulation
system to reprogram therapy to your original
group setting (refer to "Returning therapy to
your original group setting after the MRI
scan" on page 96).
Note: Do not take the patient programmer
into the MRI scanner (magnet) room. If you
brought the recharger with you to the MRI
appointment, do not take the recharger into
the MRI scanner (magnet) room either.
Using the clinician programmer to
activate a new group
The clinician managing your neurostimulation
system can activate the new group before
your MRI examination using the clinician
programmer. This will allow you to keep
therapy on during your MRI scan.
Do not change therapy to your original group
setting before the MRI scan.
Caution: Do not return therapy to your
original group setting before your MRI
94
English 37642 2015-04