Understanding Therapy Parameter Limits - Medtronic DBS Patient programmer Manuel D'utilisation

4. The patient programmer beeps when the
group settings are changed (if the audio is
turned on).
Understanding therapy
parameter limits
Each therapy parameter will have a default
limit set by your doctor. If you attempt to
change a therapy parameter outside these
set limits, you will see one of the screens
shown in Table 3.1.
Table
Lower limit
3.1 Parameter limit screens
You tried to decrease a parameter
(amplitude, pulse width, or rate)
below the lowest value allowed.
Press any arrow on the Navigator
key to clear the screen.
37642 2015-04 English
83