Distance - Burkert 8175 Manuel Utilisateur

See section 3 and the
page opposite
Yes
Connect the
sensor cables
Unscrew the plug
screws and open
See section 3.4
Install the unit
on the fitting
8175
QUICKSTART
Select the
mounting position
Have you
a separate
version?
No
Have you
a cable plug
version?
Yes No
Unscrew the 4
screws and open
Connect power
supply cable
Connect output
cable
Reassemble
housing or plug
Turn on the
power

Distance

displayed
coherent?
Yes No
Check electrical
connection
Program the transmitter
Ensure the power supply
is disconnected before
starting work.
For panel versions move to
the next step.
Ensure that security provi-
sions are considered with
the power cable and relay
circuit.
Pay attention to the max.
permitted load of the
output current loop.
If the unit does not work,
See section 5.2
Ensure the power supply is
switched on. See Mainte-
nance.
See the next page.
5