Changing The Gripper Jaws - Parkside PDBNP 14 A1 Traduction Des Instructions D'origine

Changing the gripper jaws

Friction can wear out the gripper jaws
the worn gripper jaws
follows.
♦ Unscrew the front connector
necessary. This gives you access to the following parts:
A B
A Appliance shaft
B Lock nut
C Lock washer
E Two-piece metal cone
G Gripper jaws
♦ Unscrew the two-piece metal cone (E) holding the gripper jaws
(G) from the shaft (A), using the assembly spanners
necessary.
│ GB │ IE
■ 40
with the supplied spare gripper jaws
using the assembly spanner
C E
. If this happens, replace
G
PDBNP 14 A1
as
, if
and , if