Using The Visca Rs-422 Connector Plug - Sony RM-IP10 Mode D'emploi

TALLY/CONTACT connector (connector plug,
9-pin)
TALLY/CONTACT
1
Pin No.
1
2
3
4
5
6
7
8
9
24
GB
Specifications
9
Function
CAMERA1
CAMERA2
CAMERA3
CAMERA4
CAMERA5
CAMERA6
CAMERA7
GND
GND
Using the VISCA RS-422 connector
plug
1
Grasp both ends of the VISCA RS-422 connector
plug and pull it out as shown in the illustration.
2
Insert a wire (AWG Nos. 28 to 18) into the desired
wire opening on the plug, and tighten the screw for
that wire using a flat-head screwdriver.
Wire
3
Insert the VISCA RS-422 connector plug into the
VISCA RS-422 connector.
1
Notes
• In order to stabilize the voltage level of the signal,
connect both ends to GND.
• The maximum connection distance with the VISCA
RS-422 connection is approximately 1,200 m (3,937
feet).
1
9
Flat-head screwdriver
9