Radiometer Analytical MeterLab PHM220 Mode D'emploi page 48

1. The printout below showing the CALIBRATION, SAMPLE and
METHOD SETUP parameter data stored in the Edit mode can be
obtained in the following ways:
a. Press the Mode key, then the Print key.
b. Press the Mode key for 4 seconds to enter the Edit mode,
then press the Print key.
*** PHM220 pH Meter 657R00N003
pH parameters
* CALIBRATION *
Calibration Type
Buffer used
Number of Cal Buffers
Stability Criterion
Accept time
Calibrate every
* SAMPLE *
Sample Result
Stability Criterion
Accept time
pH alarms limits
Temperature alarm limits : -9 ¡ C and 99 ¡ C
* METHOD SETUP *
Number of Decimals
Printout Format
Warning Beep
Result Beep
**************************************************************************
48
Chapter 4
Edit Data
: AUTO Recognition of Buffers
: IUPAC
: 2
: 50 mpH/min
: 200 s
: 24 hours
: AUTOREAD
: 50 mpH/min
: 60 s
: -9 . 0 p H and 23.0 pH
: 2
: All
: No
: No
16FEB95 9:15 ***