Radiometer Analytical MeterLab PHM220 Mode D'emploi page 38

Min pH Alarm
-9.0 pH
Max pH Alarm
23.0 pH
Min Temp Alarm
-9 ˚C
Max Temp Alarm
99 ˚C
Return to the first Edit display by pressing the up arrow key or leave the Edit
mode by pressing the Mode, Cal, Sample, pH/mV, or GLP key.
38
Chapter 3
If the pH of the sample is above the
maximum or below the minimum
pH limits set, an alarm message will
appear on the display and on printouts.
Range available: -9.0 to 23.0 pH
Min. and max. mV displays will appear if mV
has been selected in the mode display.
Range available: -1999 to 1999 mV
An alarm message will appear on the
display if the sample temperature is
above the maximum or below the
minimum limits set.
Range available: -9 to 99˚C