Button Combinations - Leister VARIANT T1 Instructions D'utilisation

Transport Readiness
• Swivel guide roller (15) upwards.
• Push hot-air blower (8) to the right until the locking cam (10) latches into the recess of the holding handle (28).
The hot-air blower (8) is in the parked position.
• Lower the transport rollers (26) by swivelling the handle (27). The pressure roller (11) and diverting roller (12)
are relieved for transport in this way.
8
15
Moving

Button Combinations

Main switch ON
ON
Keep Drive and Heat-
ing buttons pressed
with main switch ON
at the same time
ON
28
10
10
Carrying
Release Release
Release Release
12
27
11
26
6.0
620
80
%
Profile
1 1
2
3
Work Mode
Section 1
Profile
Setup
Section 2
27