Hendi 229064 Mode D'emploi page 8

Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning.
Cleaning
• Clean the inside and outside of the appliance,
trays, bottom pad and door with luke-warm wa-
ter, a mild detergent and a soft cloth. Do not clean
the fan part.
• Dry all parts with a dry cloth before storing the
appliance.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problem
On/off switch doesn't light red
EN
Chamber doesn't get warm
Chamber get's too warm
Drying takes to long
Technical specification
Item no.
Operating voltage and frequency
Rated input power
Temperature setting range
Time setting range
Protection class
No. of Stainless steel trays
Dimensions
Remark: Technical specification is subjected to change without prior notification.
8
• Occasionally clean the fan unit with a vacuum
cleaner.
• Note! To avoid damaging the appliance, do not
clean the appliance with aggressive chemical or
abrasives
• Store the appliance in a cool, clean and dry place
and out of reach of the children.
Possible cause
No power
Switch defect
Heating element, thermostat or
fan might be defect
Heating element or thermostat
might be defect
Humid conditions
Heating element, fan or thermo-
stat is defect
Solution
Check if the plug is connected to
the power socket
Contact the supplier
Contact the supplier
Contact the supplier
Place the appliance in a less
humid environment
Contact the supplier
229064
220- 240V~ 50-60Hz
420 - 500W
35°C ~ 70°C
30 minutes to 24 hrs
Class I
7
345x450x(H)315 mm