Hendi 229064 Mode D'emploi page 5

Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Main parts of the appliance
1) Door
2) Control panel
3) Plastic housing
4) Mesh (x1)
5) Bottom pad (x1)
6) Stainless steel grid (x7)
Control panel of the appliance
Item: 229064
1
1) Decrease setting (TEMP/TIME)
2) TEMP/TIME button
3) Increase setting (TEMP/TIME)
4) LED display
Preparations before first use
• Check the appliance for damage. In case of any
damage, contact your supplier immediately and
DO NOT use the appliance.
• Unpack the appliance carefully and remove all
protective packaging and wrapping. Make sure
no packaging debris remains on the appliance.
• Check delivery contents for any missing parts (7
stainless steel grids, mesh, bottom pad) and any
possible transport damage. In the event of dam-
age caused by transit or any parts are missing,
contact your supplier immediately.
• Clean the enclosure, stainless steel grids, bottom
pad with a soft damp cloth with some mild deter-
1
2 3
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
2
4 5
4 5
5) KEEP WARM button
6) FAST/RAW mode button
7) START/STOP button
gent. (See ==> Cleaning and Maintenance). Make
sure all the parts are completely dry before start
operating the appliance.
• Place the appliance on a horizontal, stable, clean
and fire-resistant surface.
• Make sure that a clearance of 15cm is maintained
around the appliance for adequate ventilation.
• Position the appliance in such a way that the plug
is accessible at all time.
• Place a bottom pad at the bottom to collect any
food residue during operation.
• Add a mesh on the stainless steel grid for small
size of food.
3
6
FAST
RAW
6 7
EN
5