L.S. BILODEAU AirBilo Manuel De Fonctionnement Et D'installation page 44

Step 85:
Install touchscreen. See pages 45
and 46, steps 1 to 9.
INSTALLATION OF THERMOSTAT (supplied)
Step 88:
RESPECT INDICATIONS INSIDE THE THERMOSTAT HOUSING. If only one
thermostat can be installed, at this time connect to the (W3). SEE
THERMOSTAT CONNECTION GRAPHS pages 59-60. Four (4) connection
choices. READ CAREFULLY THE NOTES INCLUDED IN THE GRAPHICS.
The model shown may differ from that provided with the furnace option pellet
installation components.
Secure all electrical wires (door switch, burner, etc.) with the wire clips (PROVIDED). Attach excess threads
with self-locking "tie wrap" fasteners. See door switch section at step 60.
Step 89:
Example: tie the wires together with "tie wrap" self-
locking fasteners and tie to the PVC auger tube.
Secure to the hopper with wire ties.
page 43
Step 86:
Before continuing, install touchscreen, steps 1 to 9
on pages 45 and 46. Ensure that ALL ELECTRIC
POWER has been shut down
control panel to your residential electrical supply.
LEAVE THE 2 "MOLEX IN PLACE. If you have
acquired the electric element option follow the
instructions in the individual guide for this option.
Branchement à
l'entrée électrique
st
1 thermostat supplied
with furnace
nd
2 thermostat supplied
with the option pellet
componenets
rd
3 thermostat supplied
with the option
electrical element
and connect the
Example:
Attach the touch screen
wire with supplied wire
and screw fasteners.
Step 87:
Replace the center panel on the
control panel with the 4 screws
removed beforehand.
ABPLUS-TREM-290519