Reference Standards Applied; Characteristics And Operation; Technical Characteristics; Mechanical Characteristics - ENAG CDS Série Manuel D'utilisation

ENAG

1.5 Reference standards applied

The standards applied are:
NF EN 60950 + A1 + A2 (October 93):
NF EN 50081-1 (June 92) EMC:
NF EN 50082-1 (June 92) EMC:
NF EN 55022 (December 1994):
Enacted at Quimper on: 2 March 2000

Characteristics and operation

2.1 Technical characteristics

2.1.1 Mechanical characteristics

All models have an IP 22 protection rating. The cover and clasp are made of steel and
the base is made of aluminium. These parts are protected by several coats of epoxy
paint.
CDSDEB
safety
equipment including electrical office
equipment.
Generic standard for emissions
Generic standard for immunity
Limits and methods for measuring the
characteristics
produced by information processing
equipment.
For and on behalf of ENAG SA,
of information
of RF
Page 40
processing
interference