Table des Matières
Publicité
122
25
26
27
28
7-4
User Code
Code C28
Select one of the 10 stored error codes and clear
the error memory
The last 10 different error codes are written to the error
memory so that they can be called up and reported
by the operator of the wheel balancer, e.g. for remote
diagnosis of malfunctions. The most recent error code
is written to memory location 1 and the previous error
codes are shifted to the higher memory locations.
From the MAIN MENU press 3 three times.
Select code C28, then press OK.
The Kernel No. of the first error in the list appears.
Press key 27 to display the error code number
(left) and the total repetitions of the error (right).
Press key 25 to display the second error in the
list, in the same way.
key 28 = Clear error memory.
Code C29
Language selection displayed on screen.
The machine has several user interface languages.
For example, the following are available:
English (Fig. 7-4), German, Italian, French, Spanish,
Portuguese, Chinese, Korean, Japanese, Russian.
From the MAIN MENU press 3 three times.
Select code C29, then press OK.
Select the desired language, then press OK.
Important:
Execute code C10 to set the selected language
in the permanent memory.
Publicité
Table des Matières
