Microwave Programs; Information On The Settings; Setting A Microwave Program - Thermador Professional Série Consignes De Sécurité

Swipe to the left or right to select the required dish.
3.
Touch the required dish.
Depending on the program you are prompted to select
4.
the weight or the pan size for the food you want to
cook. Swipe to the left or right to select the correct
value.
Touch "Continue".
5.
Touch the START l STOP touch button to start the
6.
appliance operation.

Microwave programs

You can prepare food very easily using the various
programs. You select a program and enter the weight or
amount of your food. The program then applies the most
suitable settings.
Note: The display will give you useful instructions for
each of the microwave programs. Press the INFO button
whenever it lights up, and read and follow the displayed
instructions for best cooking results.

Information on the settings

The cooking result depends on the quality of the food
▯
and the type of cookware. For an optimal cooking
result, use food that is in good condition and chilled
meat only. For frozen food, use food straight out of the
freezer only.
For some dishes, you will be required to enter the
▯
weight or amount. The appliance will then apply the
time and temperature settings for you.
It is not possible to set weights or amounts outside of
the intended range.
Information is provided, e.g. on cookware, shelf
▯
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc. during
cooking. This is shown in the display shortly after
operation starts. An audible signal will remind you at
the right time.
22
Note: For some meals you will be prompted to turn the
food over during cooking. Touch the START l STOP
touch button to continue cooking after you have turned
the food.
As soon as the cooking time has elapsed, an audible
signal sounds and "Enjoy your meal!" is displayed. The
appliance ends the operation automatically. Touch the
notification on the display.
You can continue cooking or turn the appliance off.
Pausing the operation
Touch the START l STOP touch button to pause the
operation.
Touch the START l STOP touch button again to continue
operation.
Note: The cooling fan may continue to run while an
operation is interrupted.
Changing the operating mode
Touch the START l STOP touch button.
1.
Set a different mode with the function selector.
2.
Switching the appliance off
Turn the function selector and the temperature selector
to the OFF position.

Setting a Microwave Program

Example: Setting Melt Butter mode for 1/4 cup.
Turn the function selector to PROGRAMS.
1.
Swipe to the right or left to select a Microwave
2.
Program.
Touch the Melt Butter program.
3.
Swipe to the left or right to select 1/4 cup.
4.
Touch "Continue".
5.