Trouble Shooting; Malfunction Table - Gaggenau AC 200 Notice D'utilisation

Trouble shooting

Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.

Malfunction table

Fault
The appliance does not work
The lighting is not working
The saturation indicator is lit continu-
ously
--------
20
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
Possible cause
The plug is not plugged into the mains
Power cut
The fuse is faulty
The LED lights are defective
The metal grease filter is saturated
Solution
Connect the appliance to the power
supply
Check whether other kitchen appliances
are working
Check in the fuse box to make sure that
the fuse for the appliance is in working
order
Call the after-sales service
For instructions on how to reset the satu-
ration indicator, refer to the section enti-
tled "Operating the appliance"