Table des Matières
Publicité
Installation procedure
Installing the heat shield
Use protective gloves when installing the plate.
:
WARNING
For safety reasons, the heat shield must be properly installed. This prevents
components from overheating as a result of the recirculation of hot air from the
cooktop.
The heat shield is the same width as the cooktop. For shipping, it is screwed to the
burner box.
After unpacking the cooktop, unscrew the heat shield (see illustration).
The heat shield will be able to rotate freely, as shown in the illustration.
9
Publicité
Chapitres
Table des Matières
