Table des Matières
Publicité
Before you begin
Tools and parts needed
Parts included
Phillips head screwdriver
D
Pencil
D
Drill with 1/4" (6.35 mm) bit
D
Jigsaw
D
Tape measure
D
Note: Additional materials may be necessary for installation in solid surface
countertops. Contact the countertop manufacturer.
Hold down brackets (4)
D
Clamping screws #10-32 x 2 1/2" (63.8 mm) (4)
D
Sheet metal screws #8 x 3/8" (9.5 mm) (4)
D
5
Publicité
Chapitres
Table des Matières
