AL-KO HT 440 Basic Cut Traduction Du Mode D'emploi Original page 16

Masquer les pouces Voir aussi pour HT 440 Basic Cut:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remove
any
adjusting
before
turning
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
Do
not
overreach.
per footing and balance at all times.
This enables better control of the po-
wer
tool
in
Dress properly. Do not wear loose clothing
or
jewellery.
Keep
and
gloves
away
Loose
clothes,
hair
can
be
caught
If devices are provided for the connection of
dust extraction and collection facilities, ensu-
re these are connected and properly used.
Use
of
dust
duce
dust-related
Power tool use and care
Do not force the power tool. Use the cor-
rect
power
tool
The correct power tool will do the job better
and safer at the rate for which it was designed.
Do
not
use
the
switch
does
not
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
16
key
or
wrench
the
power
tool
Keep
unexpected
situations.
your
hair,
clothing
from
moving
parts.
jewellery
or
in
moving
parts.
collection
can
hazards.
for
your
application.
power
tool
if
turn
it
on
and
Disconnect the tool from the power sour-
on.
ce before making any adjustments, chan-
ging accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
pro-
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power
tools
the
hands
Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
long
of parts and any other condition that may af-
fect the power tool's operation.If damaged,
have the power tool repaired before use.
Many
accidents
poorly
re-
Keep
cutting
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situ-
ation.
the
off.
Service
Have your power tool serviced by a qualified re-
pair person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
AL-KO Hedge trimmer
are
dangerous
of
untrained
are
caused
maintained
power
tools
sharp
Translation of original user instructions
in
users.
by
tools.
and
clean.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ht 550 safety cut

Table des Matières