AL-KO HT 440 Basic Cut Traduction Du Mode D'emploi Original page 15

HT 440, HT 550
Work area safety
Keep work area
„
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
„
atmospheres, such as in the presence of
flammable liquids,
Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
„
operating a
Distractions can cause you to loose control.
Electrical safety
„
Power tool plugs must match the outlet. Never
„
modify the plug in any way. Do not use any ad-
apter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will redu-
ce risk of electric shock.
Avoid body contact
„
grounded surfaces, such as pipes, ra-
diators, ranges
There is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
„
Water entering a power tool will increase the risk
of electric shock.
Do not abuse the cord. Never use the
„
cord for carrying,
ging the power tool. Keep cord away from
heat, oil, sharp edges and moving parts.
Damaged or
crease the risk
470518_c
clean and well
gases or dust.
power
with earthed
and refrigerators.
pulling or unplug-
entangled cords
of electric shock.
When operating a power tool outdoors, use
„
an extension cord suitable for outdoor use.
lit.
Use of
use reduces the risk of electric shock.
If operating a power tool in a damp lo-
„
cation is
al current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock
tool.
Personal safety
Stay alert, watch what you are doing and use
„
common sense when operating a power tool. Do
not use a power tool while you are tired or un-
der the influence of drugs, alcohol or medication.
A moment of inattention while operating pow-
er tools may result in serious personal injury.
or
Use personal
„
ment. Always
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hea-
ring protection used for appropriate con-
ditions will
Prevent unintentional starting. Ensure the switch
„
is in the off-position before connecting to po-
wer source, picking up or carrying the tool.
Carrying power tools with your finger on the
in-
switch or energising power tools that have the
switch on invites accidents.
a cord suitable
unavoidable, use
protective
wear eye
reduce personal
GB
for outdoor
a residu-
equip-
protection.
injuries.
15