Setting The Timer; Timer Off - Thermador SEM272 Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour SEM272:

Table des Matières

Les langues disponibles

Oven Operations

•

The oven has two Timers, which are independent of each other.

Neither timer controls oven operations.

•

Touch once and the Timer is set in minutes and seconds.

•

Touch twice and the Timer is set in hours and minutes.

To set TIMER 1 or TIMER 2:

1. Select TIMER 1 or TIMER 2.

Message scrolls in display.

2 . Set the amount of time.

(Example shows a 3-minute

setting with Timer 1.)

3 . Start Timer.

4 . When set time is complete,

"End" is displayed and 2 long beeps

signal. When turned off, display

reverts to time of day.

Note: If timer is not turned off, beeps

will continue every 30 seconds. After

5 minutes, beeps stop and the display

reverts to the previous time of day.

To Cancel an Active Timer:

Select TIMER 1 OFF or TIMER 2 OFF.

To Set Both TIMER 1 and TIMER 2:

•

Follow the steps above to set each Timer. The Timer with the least amount of countdown time has

display priority. The countdown display for the second timer is shown automatically when the first

timer has ended.

•

The words "TIMER 1" and "TIMER 2" are both displayed along with the number countdown.

•

The designation, "TIMER 1" or "TIMER 2" with the least remaining countdown time is more brightly

lit than the other.

•

During the countdown, touch CLOCK or TIMER. Depending on the pad touched, either the time of

day or the remaining time is briefly displayed.

To Change a Timer:

1. Touch TIMER 1 or TIMER 2.

2. Enter the new desired time.

3. Touch the START pad.