livin flame Stavanger 6 Mode D'emploi Et D'installation page 86

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to clean the combustion chamber (once a month)
When the stove is cold, please join the following procedure:
Remove the scraper while the door is closed.
Continue pulling and pushing the scraper for 5 or
6 times in order to clean the pipes.
Once you have cleaned the pipes, leave the scraper
removed so that the removal of the indoor walls of
the combustion chamber will be easier.
Open the door and remove the brazier and the ash
tray (Fig. 1).
Remove the upper hit fi e joining the procedure
described in the next paragraphs
Remove the outside fi eproof bulkheads. Just
move them out without rotating. If required, use a
screwdiver or a similar tool. (Fig. 2 - 3 - 4).
Remove the central bulkhead of the combustion
chamber. (Fig. 5).
Dismantle the inside lateral bulkheads levering
with a screwdiver on the point indicated in the
picture Fig. 6 - 6.1- 6.2.
Remove the bottom of the combustion chamber
using a screwdiver and starting definitively from
the right side (Fig. 7-8-9)
Use a vacuum cleaner to clean the inner part of the
combustion chamber from the residual ash (Fig.
10).
Pict. 1
Pict. 3
Pict. 5
Pict. 2
Pict. 4
Pict. 6
86

Publicité

Table des Matières
loading

Produits Connexes pour livin flame Stavanger 6

Ce manuel est également adapté pour:

Stavanger 8Tromvik 6Tromvik 8Ulvik 8Ulvik 10Liland 8

Table des Matières