livin flame Stavanger 6 Mode D'emploi Et D'installation page 60

Remote control (optional for Stavanger 6, Stavanger 8,
Tromvik 6 and Tromvik 8)
Keys and main functions
The remote control can be used to check the
stove. The remote control offers some functions
which are not available from the keyset, like the
automatic programming of the switching on and
off of the unit.
How to use the remote control:
1. Direct the remote control on the control board
of the stove
2. Check there are no obstacles between the
remote control and the receiver on the stove
3. Every function you set on the remote control
must be confirmed pressing the key SEND. After
selecting the wished function, an acoustic signal
will confirm your choice
On/Off
This function is used to switch the stove and the remote control on or off. Keep the key
pressed for at least two seconds to switch the system on or off. Then press the key SEND.
You can use the two keys to set the wished temperature between a min. value of 7°C and
a max. value of 40°C.
Please join the following procedure to set the functioning mode:
Automatic Functioning
power 1
power 2
power 3
power 4
power 5
SEND
Use this key to transmit the selected information to the pcb.
ECONO
This key activates or deactivates the function ECONO. Keep the key pressed for at least two
seconds to activate or deactivate this function.
(on1)
(on2)
(on3)
(on4)
(on5)
LCD 1 LCD 2
60