livin flame Stavanger 6 Mode D'emploi Et D'installation page 63

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Function TURBO
This function has been developed in the event you
need to heat your room quickly, for example when
you have just switched the stove on. When you choose
this function, the stove will work at its max. power for
a period of thirty minutes and the temperature will
be automatically set at 30°C. After thirty minutes (or
earlier if you give different selections from the remote
control), the stove will restart working as it did before
you activated the turbo function.
Keep the key TURBO (1) pressed for at least two
seconds to activate this function. You will read the
word "TURBO" (2) on the display of the remote
control. Set temperature and working power will
disappear. Press SEND (3) to transmit the selection to
the pcb.
You will read the word "Turb" on the control board
on the upper part of the stove. This word will appear
together with the room temperature and working
power set before activating the function TURBO.
If you want to deactivate this function before thirty
minutes have passed, press the key TURBO (1) once
again for at least two seconds. The word TURBO on
the display of the remote control will disappear and
you will see the set temperature and power again.
Press the key SEND (3) to confirm your selection
Function ECONO
The function ECONO has been developed to save
money and it is used when you want to keep the
temperature constant in the room. This function lets
the stove decrease its working power every 10 minutes
until it reaches the power 1.
Keep the key ECONO (1) pressed for at least two
seconds to activate this function. You will read the
word "ECONO" (2) on the display of the remote
control. Set temperature and working power will
disappear. Press SEND (3) to transmit the selection to
the pcb.
You will read the word "Econ" on the control board
on the upper part of the stove. This word will appear
together with the room temperature and working
power set before activating the function ECONO.
If you want to return to the standard function, press
the key ECONO (1) once again for at least two seconds.
The word ECONO on the display of the remote control
will disappear and you will see the set temperature
and power again. Press the key SEND (3) to confir
your selection.
63
2
3
1
2
1
3
2
3
1
2
3
1

Publicité

Table des Matières
loading

Produits Connexes pour livin flame Stavanger 6

Ce manuel est également adapté pour:

Stavanger 8Tromvik 6Tromvik 8Ulvik 8Ulvik 10Liland 8

Table des Matières