Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Automatic switching off OFF1
Press the key
(1). You will see the hours and
minutes and the symbol OFF1 blinking on the
remote control. Use the keys
change the wished time (intervals of 10 minutes).
To scroll the time faster, keep the keys
(3) pressed.
Confirm your selection pressing the key
once again.
You will now read the set switching off time on
the remote control. Press SEND (4) to transmit your
selection to the pcb of the stove.
The LED chrono-thermostat will light up on the
control board indicating that the programming is
on (5).
The LED chronothermostat switches off as soon as
the automatic switching on and off are completed.
The remote control does not show the previously
set time schedule anymore.
Program 2 (ON2 and OFF2)
As above but with the keys ON2 and OFF2
Cancel any eventual already set timetables.
Please join the following procedure to cancel any
other already set timetables. This example refers
to the automatic switching off of the program 1
(Off1). The procedure is the same for all plans.
Press the key corresponding to the switching on or
off time you want to cancel.
Referring to the example: press the key
You will see the hours and minutes and the symbol
OFF1 blinking on the display of the remote con-
trol. Now press the key "CANCEL" (2) to cancel
the automatic switching on or off timetables from
the display.
Press the key SEND (3) to confirm your selection
and transmit it to the pcb of the stove.
65
(2) and
(3) to
OFF1
(2) and
2
3
(1).
4
1
3
(1).
1
2
OFF1
4
2
3
1
3
1
2
Publicité
Table des Matières
