Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning of the hit fire
Remove the fi e shield following the instructions indicated in the pictures. (Pict. 14-15-16-17).
Use a vacuum cleaner to clean the upper part from the residual ash. Once finished, install the fi e shield
being sure the 3 support hooks have been placed correctly.
Holding hangs
Pict. 15: Lift the fi e shield
Ash box
Open the door and extract the ash box. Use a vacuum to remove all
the ash deposited within.
This operation must be performed more or less frequently depending
on the quality of the pellets used (Pict. 18-19).
Pict. 14: Lift the fi e shield
Pict. 16: Rotate the fi e shield
1) push
upwards
2) rotate
Pict. 17:Remove the fi e shield
84
Publicité
Table des Matières
