livin flame Stavanger 6 Mode D'emploi Et D'installation page 50

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dear Customer,
We thank you for having chosen one of our products, the fruit of technological experience and of con-
tinual research for a superior quality product in terms of safety, dependability, and service.
In this manual you will find all the information and useful suggestions to use your product with the
maximum safety and efficienc .
We highly recommend to turn to our Authorized Service Centre for the installation
and the first ignition of the device as it not only carries out the installation
perfectly but also verifies the regular operation of it.
Incorrect installation, incorrectly performed maintenance, improper use of the product release
the manufacturer from every eventual damage derived from the use of the stove.
The unit cannot be used as an incinerator. Do not use fuels other than pellets.
Never unplug the appliance when the stove is on. Make sure the stove has been switched off
via the control panel or the remote control and the fire is completely off before you remove the
power plug from the socket.
In case of smoke development from the stove at the start of burning, never pull the power
plug from the socket.
Before starting the stove again, always remove the remaining ash residue.
This manual has been realized by the manufacturer and constitutes an integral part of the
product and must remain with it during its entire lifetime. If the product is sold or transferred,
be sure that the booklet is present since the information contained in it are addressed to the
buyer, and to all those persons of various titles who complete the installation, use and maintenance.
Carefully read the instructions and the technical information contained in this manual, before
proceeding with the installation, use, and any operation on the product.
The observance of the indications contained in the present manual guarantees the safety of
people and the product, the economy of use and a longer functioning lifetime.
Although the carefully studied design and the risk analysis done by our company has permitted
the realization of a safe product, in any case, before effecting any operation on the stove, it is
recommended to keep said manual available and pay scrupulous attention to the instructions
written therein.
Be very careful when moving the ceramic details where present.
Check the precise flatness of the pavement where the product will be installed
The wall where the product will be placed must not be constructed in wood, or in any case,
made of an inflammable material, and in addition it is necessary to maintain a safety distance.
While the stove is in operation, several parts of the stove (door, handle, sides) can reach high
temperatures. Therefore pay attention and use the proper precautions, above all in the presence
of children, elderly or disabled persons, and animals.
Assembly must be performed by authorized persons (Authorized Assistance Center).
Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the
intent of pursuing a policy of constant development and renewal of the product can, without any
notice, make any modifications that are believed opportune.
When the stove is working at its maximum speed, it is strongly suggested to wear gloves while
handling with the door for pellets loading and the door handle.
It is prohibited to install in bedrooms or in explosive environments.
Only use replacement parts recommended by the supplier.
Stove
Cod. 001120
50

Publicité

Table des Matières
loading

Produits Connexes pour livin flame Stavanger 6

Ce manuel est également adapté pour:

Stavanger 8Tromvik 6Tromvik 8Ulvik 8Ulvik 10Liland 8

Table des Matières