Setting The Speed - IKA HS 260 basic Mode D'emploi

Control model
The amount 3 4 5
of time requi-
red for the agi-
tation process
Time mode in mode of operation A
can be adjusted
3 4 5
with aid of the
right turn but-
ton and is
shown on the
Continuous mode in mode of operation A
right display.
Ist eine Sollzeit
If a target time
(max. 9 h 59 min)
is set in the right
display or has
been saved from previous agitation
processes, you can activate or terminate the agitation process with the
left turn button while setting the target speed.
You can exit timed mode and interrupt the agitation process by pres-
sing on the right turn button.
ATTENTION! After a power failure, the device will not
automatically start up in operating mode A or B by itself.
In operating mode C, the devive automatically starts up
by itself.

Setting the speed

Basic model
You can adjusted the speed (HS max. 300 rpm and KS max. 500 rpm)
by turning the left turn button. When you do this, you should note
that the agitator does not begin to run until continuous mode or time
mode is active. For the user this means that it is possible to set a speed
in the Off operating mode that will be required for continuous opera-
tion or for several agitation processes in timed mode.
9 5 9 .
9 5 9 : NOTE: After the power has failed, the set time is erased and the
3 4 5
device switches into Offline operating mode (standstill). The set speed
I
/
i
m i n n m i n
stays adjusted.
PV PV
Control model
9 5 9 :
3 4 5
The target speed
I
/ i and upper speed
m i n n m i n
limit (HS max.
PV PV
300 rpm and
KS max. 500 rpm)
9 5 9 :
3 4 5
required for the
I
/ i agitation pro-
m i n n m i n
cess can be set
PV
PV
Display after power failure
with the aid of
in mode of operation A
the left turn
button and are
shown on the
right display.
Continuous
mode is activa-
ted by presing the
left turn button. If a target time is set in the right display in continuous
mode or is saved from previous agitation processes, the agitation pro-
cess can be continued in continuous mode by pressing the right turn
button. The agitation process can be terminated by pressing the left
or the right turn button.
3 4 5
3 4 5
I
/
m i n
PV
Time mode in mode of operation A
3 4 5
3 4 5
I
/
m i n
PV
Continuous mode in mode of operation A
3 4 5
I
/
m i n
PV
Display after power failure
in mode of operation A
ATTENTION! After a power failure, the device will not
automatically start up in operating mode A or B by itself.
In operating mode C, the device automatically starts up
by itself.
9 5 9 .
9 5 9 :
i
n m i n
PV
9 5 9 :
i
n m i n
PV
9 5 9 :
i
n m i n
PV
27