Display; Operating Modes - IKA HS 260 basic Mode D'emploi

Display

Description of the LED-Display - HS/KS 260 basic
Display element for the setting speed
Mot 1/min 50 100 150 200 250
On Off 5 10 15 20
Continuous Standstill
operation
The basic model of the device can be used in continuous or timed
mode depending on the option you select. The ride turn button is used
to make the setting..
Continuous operation:
The device does not interrupt the agitation
sequence (On-LED is lit).
Time operation:
The device interrupts the agitation process
after a set amount of time (max. 50 minutes).
The speed required for the agitation process can be adjusted before
ore after the operating mode is selected.
The HS/KS 260 basic is adjusted so that after you press the power
switch, the agitation process (speed) and time mode is turned off
(Off-LED lights up).
22
300 350 400 450 500
50
25 30 35 40 45 Time min
Display element for
the setting agitation time
Description of the LCD-Display - HS/KS 260 control
Real value
SV S V
= et alue PV
(Rated value)
=
= Locking
Mode of operation A: Star out
Mode of operation B: Star on
Mode of operation C: Star flash

Operating modes

Settingthe operation mode (control model only)
The Control device model can be operated in the modes described
below:
Operation mode A:
The HS/KS 260 control is switched into operating mode A when it
leaves the factory. After the device is turned on with the power switch
(flip switch), the agitation and time expiration functions are turned
off. The set target values are stored and are displayed digitally. They
are adopted when the corresponding functions are turned on. the set
target values can be varied. After the power has been turned off and
Rated value
P V
= rocesst alue
(Real value)
e.g. phys. unit,
mode of operation,
error code