Customization Basics - GE PSB42LGRWV Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CUSTOMIZATION BASICS:

Stainless Steel Wrapped Models
42" wide model—PSB42LSRBV
48" wide model—PSB48LSRBV
Stainless Steel Wrapped Refrigerators
Stainless Steel wrapped refrigerators have
wrapped doors and grille panels, and beveled
edges. These models are shipped ready for
installation.
Trimmed Models
42" wide models—PSB42LGRWV, PSB42LGRBV
48" wide models—PSB48LGRWV, PSB48LGRBV
Trimmed Refrigerator Panels
Trimmed refrigerators are designed to be
customized with decorative panels. Field
installed custom door and grille panels are
required. There are three custom panel
options. You can install a 1/4" framed panel,
a 3/4" framed custom panel or a 3/4" full-
width overlay custom panel.
1/4" Framed Panels
You may install 1/4" thick custom panels from
your cabinet manufacturer. The decorative
panel slides into the factory installed trim.
Or, order black, white or stainless steel
accessory panels from your Profile
Framed Panel
Accessory Panels
White, black and stainless steel accessory
panels are available from your Profile dealer.
Panels are cut to size and ready to install.
Installation Instructions
dealer.
Door Handles
3/4" Framed Custom Panels
3/4" framed custom panels are secured
to a 1/4" finished backer panel. They are
designed to slide into the factory installed
trim, no kits required. The backer panel
will be exposed on the handle side and
therefore must be finished.
3/4" Custom Panel
3/4" Full-Width Overlay Custom Panels
3/4" full-width overlay custom panels are
designed to slide into the factory installed
trim, no kits required. In this design, you
can achieve a nearly trimless appearance. A
spacer panel must be installed between the
finished backer and appearance panel. The
backer panel will be exposed on the handle
side and therefore must be finished.
3/4" Overlay Panel
.10" Thick Spacer Panel
1/4" Thick Backer Panel
Door Handles
The handles can be used to accommodate
both framed or custom panels.
NOTE: For 3/4" custom panels, please refer
to diagrams on page 23 for optimum handle
clearance.
Models
White
Acrylic
PSB42LGRWV
PSPK42DWW
PSB42LGRBV
PSB48LGRWV
PSPK48DWW
PSB48LGRBV
20
Door Handles
Black
Stainless
Acrylic
Steel
PSPK42DSS
PSPK42DBB
PSPK42DSS
PSPK48DSS
PSPK48DBB
PSPK48DSS

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Psb42lgrbvPsb48lgrwvPsb48lgrbv

Table des Matières