Display Items - Sony DSX-S100 Mode D'emploi

Masquer les pouces Voir aussi pour DSX-S100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
Connect the iPod to the supplied
adaptor.
5
Slide in the TUNE TRAY by pressing
CLOSE on the TUNE TRAY until it
locks shut.
6
Close the front panel.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.*
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press (SOURCE/OFF) repeatedly
until "USB" appears. ("IPOD" appears in the
display when iPod is recognized.)
* Display differs depending on the iPod, or may not
appear in the case of an iPod touch being
connected.
7
Adjust the volume.
Press (SOURCE/OFF) for 1 second to stop
playback.
Removing the iPod
1 Stop the iPod playback.
2 Press (OPEN).
3 Press PUSH OPEN on the TUNE TRAY.
4 Remove the iPod.
5 Slide in the TUNE TRAY, and close the front
panel.
Notes
• Do not remove the iPod during playback, otherwise
data may be damaged.
• Do not place non-iPod devices on the TUNE TRAY,
or foreign objects, such as coins, keys, cards,
liquids, etc.
• Do not place a flammable object such as a lighter on
the TUNE TRAY, as this may cause smoke, fire, or
other accident.
• For iPod users, use the supplied adaptor XA-50IP. It
is designed for use with this unit only, and should not
be used with the other USB devices.
• This unit cannot recognize iPod via a USB hub.
• Slide in the TUNE TRAY and close the front panel
before playback, as damage may result in the case
of an obstruction in the car, etc.
• If the front panel does not fully open because of the
dashboard shape at the installation position, detach
the front panel and open the TUNE TRAY manually.
For how to detach the front panel, see page 7.
• It is extremely dangerous to connect or remove the
iPod while driving.
Tips
• When the ignition key is turned to the ACC position,
and the unit is on, the iPod will be recharged.
• If the iPod is disconnected during playback, "NO
DEV" appears in the display of the unit.
Resuming mode
When the iPod is connected, the mode of this
unit changes to resuming mode and playback
starts in the mode set by the iPod.
In resuming mode, repeat/shuffle play does not
function.

Display items

A Source, Track name, Artist name, Album
name
B Track name, Artist name, Album name, Track
number/Elapsed playing time, Clock
To change display items A, B, press (DSPL).
continue to next page t
17

Publicité

Table des Matières
loading

Table des Matières