Technical Data Sendai 135/155 And Sendai - HASE SENDAI Manuel D'utilisation

11. Technical Data Sendai 135/155 and Sendai 175

The Sendai 135/155 and Sendai 175, certified in compliance with DIN-EN 13240
and Art. 15 a B-VG (Austria), can only be operated when the fire box is closed.
Conforms with the DIBt (Deutschen Institut für Bautechnik/German Institute for Build-
ing Technology) approval criteria for direct vent fireplaces for solid fuels. Multiple
connections to the chimney are possible, see point 4. "Connection of Multiple
Devices in Direct Vent Operation".
DIBt approval number: Z-43.12-396 / Typ FC41x and FC51x
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output**
Efficiency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 - 80 m² (subject to change).
44
Dimensions:
Stove
Fire box
Weight Sendai 135
Weight Sendai 155 (without heat retaining block)
Weight Sendai 175 (without heat retaining block)/Additional module
Weight 1x heat retaining block flue pipe conection top/rear
¹ Vertical flue pipe length
Flue pipe diameter
Pipe diameter of HASE ventilation system**
Wood
6 kW
6,0 kW
236 ˚C
299 ˚C
5.33 g/s
12 Pa
82 %
817 mg/Nm³
9 mg/Nm³
66 mg/Nm³
99 mg/Nm³
25 m³/h
* Test bench performance and values at 13% O
** For separate air supply in low-energy houses and insufficient combustion air supply in the room where
the stove is installed.
Height Width
133/155/175 - 220 cm 37 cm
61 cm 21 cm
2
Depth
41 cm
27 cm
140 kg
155 kg
163/15 kg
63/52,5 kg
min. 25 cm
15 cm
10 cm