Technical Data - HASE LIMA Manuel D'utilisation

13. Technical Data

The LIMA C.16 / SILA, certifi ed in compliance with DIN-EN 13240 and Art. 15 a
B-VG (Austria), can only be operated when the fi re box is closed. Conforms with
the DIBt (Deutschen Institut für Bautechnik/German Institute for Building Technology)
approval criteria for direct vent fi replaces for solid fuels. Multiple connections to
the chimney are possible, see point 4. "Connection of Multiple Devices in Direct
Vent Operation". DIBt approval number: Z-43.12-396 (FC 61x)
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output**
Effi ciency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on (subject to change).
20 - 80 m²
Dimensions: Height
Stove 126 cm
Fire box 40 cm
Weight LIMA C.16 (ceramic/soapstone)
44
Wood
6 kW
6,4 kW
256 ˚C
308 ˚C
5,6 g/s
12 Pa
81 %
≤ 1250 mg/Nm³
≤ 40 mg/Nm³
≤ 120 mg/Nm³
≤ 200 mg/Nm³
25 m³/h
Width
47 cm
31 cm
195/220 kg
Weight SILA (steel ceramic/soapstone)
Weight 1x heat retaining block
¹Vertical fl ue pipe length
Flue pipe diameter
Pipe diameter of HASE ventilation system***
Front view LIMA C.16 / SILA:
47
Top view LIMA C.16 / SILA:
Depth
47 cm
* Test bench performance and values at 13% O
28 cm
** The additional supply pressure required for the combustion air connection with the HASE Air System:
behind= 3 Pa
*** For separate air supply in low-energy houses and insuffi cient combustion air supply in the room where
the stove is installed.
140/180/200 kg
min. 30 cm
Side view LIMA C.16 / SILA:
13,5
Inst. of HASE air system below
Dimensions in cm
2
82 kg
15 cm
10 cm