Technical Data Delhi; Dimensions - HASE Delhi Manuel D'utilisation

11. Technical Data Delhi 114

The Delhi 114, certified in compliance with DIN-EN 13240 and Art. 15 a B-VG (Aus-
tria), can only be operated when the fire box is closed; more than one device can be
connected to the chimney.
The following data applies to the chimney characteristics in accordance with
EN 13384-1 /-2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output
Efficiency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
* Test bench performance and values at 13% O
2
Depending on the insulation of the building, the nominal thermal output of 5 kW indi-
cated on 15 - 60 m² (subject to change).

Dimensions:

Height
Stove 113,5 cm
Fire box 44 cm
Weight
Flue pipe diameter
Pipe diameter of Hase ventilation system**
Wood
5 kW
5,5 kW
253 ˚C
315 ˚C
4,5 g/s
12 Pa
80,4 %
1021 mg/Nm³
16 mg/Nm³
56 mg/Nm³
120 mg/Nm³
21 m³/h
Width Depth
45 cm 45 cm
29 cm 28 cm
118 kg
15 cm
10 cm
Front view Delhi 114
Ø 39
Ø 45
Top view Delhi 114
** For separate air supply in low-energy houses and insufficient combustion air supply in the room
where the stove is installed.
Side view Delhi 114
GB
Ø 25
7
Connection area
for the inst. of Hase air
system below
Dimensions in cm
43