Technical Data - HASE COMO Manuel D'utilisation

12. Technical Data

The COMO B.20, certifi ed in compliance with DIN-EN 13240 and Art. 15 a B-VG
(Austria), can only be operated when the fi re box is closed. Conforms with the DIBt
(Deutschen Institut für Bautechnik/German Institute for Building Technology) approv-
al criteria for direct vent fi replaces for solid fuels. Multiple connections to the chim-
ney are possible, see point 4. "Connection of Multiple Devices in Direct Vent
Operation".
DIBt approval number: Z-43.12-396 - Typ FC61x
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output**
Effi ciency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 6,5 kW
indicated on 25 - 90 m² (subject to change).
Dimensions:
Stove
Fire box
Weight (Ceramic / Soapstone)
Flue pipe diameter
Pipe diameter of HASE ventilation system**
Front view:
Wood
6,5 kW
7,0 kW
227 ˚C
272 ˚C
6,3 g/s
12 Pa
83 %
≤ 1250 mg/Nm³
≤ 40 mg/Nm³
Top view:
≤ 120 mg/Nm³
≤ 200 mg/Nm³
26 m³/h
Height Width
124 cm 60 cm
35 cm 31 cm
Side view:
60
19,5
Inst. of HASE air system
below
* Test bench performance and values at 13% O
** For separate air supply in low-energy hous-
es and insuffi cient combustion air supply in
the room where the stove is installed.
Depth
56 cm
32 cm
240 / 260 kg
15 cm
10 cm
en
2
Dimensions in cm
37