Connection Of Multiple Devices In Direct Vent Operation; Fuel Load Sizes And Thermal Output; Wood Briquettes; Operating The Revolving Console - HASE LIMA Manuel D'utilisation

4. Connection of Multiple Devices in
Direct Vent Operation
When the LIMA, SILA or SILA PLUS is operated as
a direct vent model, more than one device can be
connected to the chimney under the following condi-
tions:
CAUTION!
Multiple appliances per chimney are per-
mitted in line with the applicable national
and regional regulations.
All connected fireplace stoves must be in
the same building unit or in the same ef-
fective area of the ventilation system.
The inlets for the combustion air ducts are
located in areas of equal pressure (same
pressure ratios), wind-induced pressure
fluctuations have to be avoided.
The inlets for the combustion air ducts are
located in areas of equal pressure (same
pressure ratios), wind-induced pressure
fluctuations have to be avoided.
NOTE!
In England (UK), according to the appli-
cable building regulations (The Building
Regulations 2010: Combustion appliances
and fuel storage systems, point 1.25),
each solid-fuel appliance is required to
have its own chimney.
40
5.

Fuel Load Sizes and Thermal Output

The thermal output depends on the amount of fuel
you put in the stove. When adding more fuel, please
do not exceed the maximum fuel load size of 2 kg.
The fuel can be filled to the maximum height of 20
cm in the combustion chamber. Exceeding the maxi-
mum fuel load size leads to a danger of overheat-
ing, which can result in damage to the stove and the
risk of a stove fire.
NOTE!
To attain a thermal output of approx. 6 kW,
burn wood logs that weigh a total of 1.5 kg
and are no longer than 25 cm in length for
about 45 min.
The LIMA, SILA or SILA PLUS is intended for inter-
mittent operation, please only apply one fuel layer
at a time.

5.1 Wood Briquettes

You can also fuel your LIMA, SILA or SILA PLUS
with wood briquettes as specified in DIN EN ISO
17225 or of equal quality. Please note that wood
briquettes swell and expand during combustion. As
compared to the amount of fuel when using logs, re-
duce the amount by approx. 10-20% based on the
calorific value of the wood briquettes. The control
element settings and procedure are the same as
when burning logs.
6.

Operating the Revolving Console

The LIMA, SILA or SILA PLUS has a maximum ro-
tational angle of 120 degrees; you can adjust the
rotational angle in 15-degree increments.
Unlock the rotary console by briefly pressing the
button A and then turn the LIMA, SILA or SILA
PLUS to the desired position. Shortly before the fi-
nal position is reached, press the key A again and
lock the stove into place with a slight rotational
movement.
A
fig. 4
WARNING!
Never turn stove when lighting fire!
In the whole rotational area range, the safe
distances (radiation area) apply to dis-
tances to flammable materials.