Factory Reset; Socket For Software Upgrade - PERFECTPRO DABBOX Mode D'emploi

Factory reset

If your radio fails to operate or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to select "System Setting" and press
the Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to select "Factory Reset" and press
the Tuning control knob to enter the setting.
5. Rotate the Tuning control knob to highlight "Yes" to proceed. If you
do not wish to carry out a system reset, highlight "No" and then press
the Tuning control knob to confirm the setting.
6. With "Yes" highlighted, press the Tuning control knob. A full reset will
be performed. All presets and station lists will be erased. All settings
will be set to their default values. After a system reset, the radio will
be restarted. The display will show "Welcome to Digital Radio" and a
scan of the DAB band III will be performed.
In case of malfunction due to electrostatic discharge, reset the
product (reconnection of power source may be required) to resume
normal operation.

Socket for software upgrade

From time to time, new software features for your radio may be
developed. Your radio has therefore been designed to allow its internal
software to be updated using your USB upgrade port.
You should not attempt to update your radio unless it is recommended
to you by Perfectpro Customer Services. Updating the software may
18
remove all radio station presets and settings from your radio.
Software updates for your radio may be available in the future.
As software updates become available software and information on
how to update your radio can be found at:
www.perfectpro.eu
For more information, please contact our Head Office by sending an
email to info@perfectpro.eu
1. Use a micro USB cable (not supplied) to connect the USB socket in
the battery compartment to your PC.
2. With your radio switched on, press and hold the Info/Menu button to
access the menu for the current mode.
3. Rotate the Tuning control knob to select "System Setting" and press
the Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to select "Software Upgrade" and
press the Tuning control knob to enter the setting. The default setting
is "No". Otherwise, rotate the Tuning control knob to choose "Yes"
and press the Tuning control knob. The display will show "Waiting for
PC wizard".
5. Go to the website above to download the latest software. Follow
the on-screen instructions on your PC provided with the upgrade
software to complete the software upgrade.
6. If you do not wish to carry out a software upgrade, rotate the Tuning
control knob to choose "No" in step 4 and press the Tuning control
knob.
Note:
Please use AC power cord as main power when upgrading software.
Do not switch off the power to the radio until the update operation is
complete and the radio has restarted, otherwise the unit may become
permanently damaged.